To get efficiently working belt conveyors, there is a need for scrapers that can be applied in various parts of the belt according to the material they carry. In addition to increasing the efficiency, these scrapers which extend the life of the belt and thus the maintenance periods with the right application choices, you can reduce the operating costs of your facilities.
We can supply belt scrapers designed to work under all kinds of heavy conditions as primary type, secondary type and V (internal) type.
Polyurethane tipped primary scrapers designed to show high scraper performance under all heavy conditions.
Supporting the system with double-sided springs allows minimizing material leakage with long-term and continuous pressure, especially in production facilities under heavy conditions.
Easy to take-out feature of our product maintenance and tip change times are very short. Polyurethane tip is A80 hardness, and operates in the range of -40 ° C, + 90 ° C.
Secondary scrapers are used especially in problematic situations such as spilling from the tape to the tape and the closure of the tape and the chute.
It has a very high performance in cleaning fine-dusty or damp-adhesive materials from the surface of the tape. It provides high stripping performance by absorbing impacts thanks to its rubber hubs. Recommended for conveyor systems with belt widths up to 2000 mm and a speed of 3m / s. Due to its special design and tension system, it can be used in both double and unidirectional belts.
V type scrapers for internal surface cleaning of conveyor belts and material to tail drums are manufactured to prevent escape.
The pressure mechanism of the system is adjustable and it is very easy to adjust. Thanks to its adjustable structure and abrasion resistant polyurethane tips, lasts less than 3 times longer.
Thanks to the special closing system, the system is closed at 100% rate and thrown out of the edges in materials that may fall from the upper region and applied between 500-2400 mm bands.
English
Türkçe 
Français